The Turia Fire dooris the model that puts the greatest manufacturing options at your disposal,both in terms of measurements and special accessories. It is available inversions of 1 and 2 leaves, with asymmetrical leaves if needed. For the EI2 30, 60 and 90 classifications, the leaf is63mm thick, and it is constructed with two 0.8mm thick sheets assembled withoutwelding. In the case of EI2 120 a third sheet is added, thatgives it a leaf thickness of 73mm. Assembled 3 own design hinges with CE marking (4 for EI2 120).Corner frame model CS5 ready to be installed on-site with mortar or by screwingit on an approved steel sub-frame.

53mm thick leaf, assembled with two 1,2 mm steel steel sheets. Equipped with 3 points security lock embedded with anti-drilling shield on the outside. Doorset completed with 1,5mm thick CR8 frame equipped with rubber seal to achieve a smooth and tight closing. The frame is prepared to be installed to the wall with metallic anchors. It has 2 steel adjustable in three directions hinges with nickel trims, in addition 2 anti-crow bar bolts complete the fittings. All these components make the door achieve C2 level in terms of burglar-protection.

En Andreu disponemos de un kit de control de humos Sa para toda nuestra gama TURIA en 1 y 2 hojas, que permite añadir a la prestación EI2tt-C5 las prestaciones Sa Nuestro Kit de Control de Humos Sa se compone...

The most versatile Multi-purpose door of the range widens its diversity of models by offering the possibility of being reversible. Leaf assembled without welding, starting from 2 steel plates. It is available in versions of 1 and standard and special measurements.

La puerta Ensamblada de una hoja alcanzó la clasificación: – Permeablidad al aire (UNE EN 1026:2000): A2 – Estanqueidad al agua (UNE EN 1027:2000): A0 – Carga del viento (UNE EN 12211:2000): CV3