Fire Rated EI2 120 door with acoustic 30-34 dB performance, available in double leaf, tested under EN ISO 10140-2 and classified according to EN ISO 717-1 standards. 63 mm thick door leaf, composed of two 0,8mm steel sheets assembled to CS5 corner frame. Equipped with 3 in-house design hinges with CE marking. Sound insulation is achieved by installing one of the following solutions: 1. Closed frame. Formed by a D-shaped seal, placed in the inner perimeter of the frame, a d-shaped strip, placed on the upper part of the frame and leaf on hinges side, a flipper joint and d-shaped strip placed at the height of the lock between two leaves, a flipper joint on the upper part of the frame and a acoustic bottom threshold for CS5 frame on the bottom part of the leaf including d-shaped strip and D-shaped seal. 2. Acoustic bottom frame: Formed by a D-shaped seal, placed in the inner perimeter of the frame, a d-shaped strip, placed on the upper part of the frame and leaf on hinges side, a flipper joint and d-shaped strip placed at the height of the lock between two leaves, a flipper joint on the upper part of the frame and a threshold on the lower part of the leaf including d-shaped strip and D-shaped seal.

Fire Rated EI2 60 door with acoustic 31-34 dB performance, available in double leaf, tested under EN ISO 10140-2 and classified according to EN ISO 717-1 standards. 63 mm thick door leaf, composed of two 0,8mm steel sheets assembled to CS5 corner frame. Equipped with 3 in-house design hinges with CE marking. Sound insulation is achieved by installing one of the following solutions: 1. Closed frame. Formed by a D-shaped seal, placed in the inner perimeter of the frame, a d-shaped strip, placed on the upper part of the frame and leaf on hinges side, a flipper joint and d-shaped strip placed at the height of the lock between two leaves, a flipper joint on the upper part of the frame and a acoustic bottom threshold for CS5 frame on the bottom part of the leaf including d-shaped strip and D-shaped seal. 2. Acoustic bottom frame: Formed by a D-shaped seal, placed in the inner perimeter of the frame, a d-shaped strip, placed on the upper part of the frame and leaf on hinges side, a flipper joint and d-shaped strip placed at the height of the lock between two leaves, a flipper joint on the upper part of the frame and a threshold on the lower part of the leaf including d-shaped strip and D-shaped seal.

Fire Rated EI2 90 door with acoustic 35-36 dB performance, available in single leaf, tested under EN ISO 10140-2 and classified according to EN ISO 717-1 standards. 63 mm thick door leaf, composed of two 0,8mm steel sheets assembled to CS5 corner frame. Equipped with 3 in-house design hinges with CE marking. Sound insulation is achieved by installing one of the following solutions: 1. Closed frame. Formed by a D-shaped seal, placed in the inner perimeter of the frame, a d-shaped strip, placed on the upper part of the frame and leaf on hinges side and a acoustic bottom threshold for CS5 frame on the bottom part of the leaf including d-shaped strip and D-shaped seal. 2. Acoustic bottom threshold. Formed by a D-shaped seal, placed in the inner perimeter of the frame, a d-shaped strip, placed on the upper part of the frame and leaf on hinges side and a threshold on the lower part of the leaf including d-shaped strip and D-shaped seal.

Multipurpose door with acoustic 35-36 dB performance, available in single leaf, tested under EN ISO 10140-2 and classified according to EN ISO 717-1 standards. 63 mm thick door leaf, composed of two 0,8mm steel sheets assembled to CS5 corner frame. Equipped with 3 in-house design hinges with CE marking. Sound insulation is achieved by installing one of the following solutions: 1. Embedded threshold. Formed by a D-shaped seal, placed in the inner perimeter of the frame, a d-shaped strip, placed on the upper part of the frame and leaf on hinges side and a threshold embedded in the lower edge of the leaf. 2. Closed frame. Formed by a D-shaped seal, placed in the inner perimeter of the frame, a d-shaped strip, placed on the upper part of the frame and leaf on hinges side and a acoustic bottom threshold for CS5 frame on the bottom part of the leaf including d-shaped strip and D-shaped seal. 3. Acoustic bottom threshold. Formed by a D-shaped seal, placed in the inner perimeter of the frame, a d-shaped strip, placed on the upper part of the frame and leaf on hinges side and a threshold on the lower part of the leaf including d-shaped strip and D-shaped seal.

Fire Rated EI2 60 door with acoustic 35-36 dB performance, available in single leaf, tested under EN ISO 10140-2 and classified according to EN ISO 717-1 standards. 63 mm thick door leaf, composed of two 0,8mm steel sheets assembled to CS5 corner frame. Equipped with 3 in-house design hinges with CE marking. Sound insulation is achieved by installing one of the following solutions: 1. Embedded threshold. Formed by a D-shaped seal, placed in the inner perimeter of the frame, a d-shaped strip, placed on the upper part of the frame and leaf on hinges side and a threshold embedded in the lower edge of the leaf. 2. Closed frame. Formed by a D-shaped seal, placed in the inner perimeter of the frame, a d-shaped strip, placed on the upper part of the frame and leaf on hinges side and a acoustic bottom threshold for CS5 frame on the bottom part of the leaf including d-shaped strip and D-shaped seal. 3. Acoustic bottom threshold. Formed by a D-shaped seal, placed in the inner perimeter of the frame, a d-shaped strip, placed on the upper part of the frame and leaf on hinges side and a threshold on the lower part of the leaf including d-shaped strip and D-shaped seal.

Fire Rated EI2 60, 90 and 120’ door with acoustic 30-35 dB performance, available in doble leaf, tested under EN ISO 10140-2 and classified according to EN ISO 717-1 standards. 63 mm thick door leaf, composed of two 0,8mm steel sheets assembled to CS5 corner frame. Equipped with 3 in-house design hinges with CE marking. Acoustic insulation is achieved by using the smoke kit. Sound insulation is achieved by installing: • D-shaped seal, placed in the inner perimeter of the frame. • d-shaped strip, placed on the lower edge of the leaf and other seal on the upper part of the frame and on the hinges side of the leaf. • Flipper joint and d-shaped strip placed at the height of the lock between two leaves. • Flipper joint on the upper part of the frame. • Sill supplied loose for screwing or fixing to the floor.

Fire Rated EI2 60, 90 and 120’ door with acoustic 26-29 dB performance, available in doble leaf, tested under EN ISO 10140-2 and classified according to EN ISO 717-1 standards. 63 mm thick door leaf, composed of two 0,8mm steel sheets assembled to CS5 corner frame. Equipped with 3 in-house design hinges with CE marking. Sound insulation is achieved by installing: • D-shaped seal, placed in the inner perimeter of the frame. • d-shaped strip, placed on the lower edge of the leaf and on other seal on the upper parto f the frame and on the hinges side of the leaf. • Flipper joint and d-shaped strip placed at the height of the lock between two leaves. • Flipper joint on the upper part of the frame.

Multipurpose door with acoustic 28-29 dB performance, available in single leaf, tested under EN ISO 10140-2 and classified according to EN ISO 717-1 standards. 63 mm thick door leaf, composed of two 0,8mm steel sheets assembled to CS5 corner frame. Equipped with 3 in-house design hinges with CE marking. Sound insulation is achieved by installing: • D-shaped seal, placed in the inner perimeter of the frame. • d-shaped strip, placed on the lower edge of the leaf and other seal on the upper part of the frame and on the hinges side of the leaf.

Multipurpose door with acoustic 35-36 dB performance, available in single leaf, tested under EN ISO 10140-2 and classified according to EN ISO 717-1 standards. 63 mm thick door leaf, composed of two 0,8mm steel sheets assembled to CS5 corner frame. Equipped with 3 in-house design hinges with CE marking. Sound insulation is achieved by installing one of the following solutions: 1. Embedded threshold. Formed by a D-shaped seal, placed in the inner perimeter of the frame, a d-shaped strip, placed on the upper part of the frame and leaf on hinges side and a threshold embedded in the lower edge of the leaf. 2. Closed frame. Formed by a D-shaped seal, placed in the inner perimeter of the frame, a d-shaped strip, placed on the upper part of the frame and leaf on hinges side and a acoustic bottom threshold for CS5 frame on the bottom part of the leaf including d-shaped strip and D-shaped seal. 3. Acoustic bottom threshold. Formed by a D-shaped seal, placed in the inner perimeter of the frame, a d-shaped strip, placed on the upper part of the frame and leaf on hinges side and a threshold on the lower part of the leaf including d-shaped strip and D-shaped seal.