Multipurpose door with acoustic 35-36 dB performance, level 2 air permeability, 00 watertightness and C3 wind resistance. The air, water and wind (AAV) classification is achieved with one of the following solutions:

Fire Rated EI2 90 door with acoustic 30-35 dB performance, level 3 air permeability, 2A watertightness and C3 wind resistance. The air, water and wind (AAV) classification is achieved with one of the following solutions:

Puerta Corta-Fuegos EI2 60 y 31-34 dB de prestación acústica, nivel 3 de permeabilidad al aire, 2A de estanqueidad al agua y C3 de resistencia al viento. La clasificación aire, agua y viento (AAV) se alcanza con una de las siguientes...

Fire Rated EI2 60 door with acoustic 35-36 dB performance, level 2 air permeability, 00 watertightness and C3 wind resistance. The air, water and wind (AAV) classification is achieved with one of the following solutions:

Fire Rated EI2 60 door with acoustic 35-36 dB performance, level 4 air permeability, 5A watertightness and C3 wind resistance. The air, water and wind (AAV) classification is achieved with one of the following solutions:

Fire Rated EI2 120 door with acoustic 30-34 dB performance, available in double leaf, tested under EN ISO 10140-2 and classified according to EN ISO 717-1 standards. 63 mm thick door leaf, composed of two 0,8mm steel sheets assembled to CS5 corner frame. Equipped with 3 in-house design hinges with CE marking. Sound insulation is achieved by installing one of the following solutions: 1. Closed frame. Formed by a D-shaped seal, placed in the inner perimeter of the frame, a d-shaped strip, placed on the upper part of the frame and leaf on hinges side, a flipper joint and d-shaped strip placed at the height of the lock between two leaves, a flipper joint on the upper part of the frame and a acoustic bottom threshold for CS5 frame on the bottom part of the leaf including d-shaped strip and D-shaped seal. 2. Acoustic bottom frame: Formed by a D-shaped seal, placed in the inner perimeter of the frame, a d-shaped strip, placed on the upper part of the frame and leaf on hinges side, a flipper joint and d-shaped strip placed at the height of the lock between two leaves, a flipper joint on the upper part of the frame and a threshold on the lower part of the leaf including d-shaped strip and D-shaped seal.

Fire Rated EI2 60 door with acoustic 31-34 dB performance, available in double leaf, tested under EN ISO 10140-2 and classified according to EN ISO 717-1 standards. 63 mm thick door leaf, composed of two 0,8mm steel sheets assembled to CS5 corner frame. Equipped with 3 in-house design hinges with CE marking. Sound insulation is achieved by installing one of the following solutions: 1. Closed frame. Formed by a D-shaped seal, placed in the inner perimeter of the frame, a d-shaped strip, placed on the upper part of the frame and leaf on hinges side, a flipper joint and d-shaped strip placed at the height of the lock between two leaves, a flipper joint on the upper part of the frame and a acoustic bottom threshold for CS5 frame on the bottom part of the leaf including d-shaped strip and D-shaped seal. 2. Acoustic bottom frame: Formed by a D-shaped seal, placed in the inner perimeter of the frame, a d-shaped strip, placed on the upper part of the frame and leaf on hinges side, a flipper joint and d-shaped strip placed at the height of the lock between two leaves, a flipper joint on the upper part of the frame and a threshold on the lower part of the leaf including d-shaped strip and D-shaped seal.

Fire Rated EI2 90 door with acoustic 35-36 dB performance, available in single leaf, tested under EN ISO 10140-2 and classified according to EN ISO 717-1 standards. 63 mm thick door leaf, composed of two 0,8mm steel sheets assembled to CS5 corner frame. Equipped with 3 in-house design hinges with CE marking. Sound insulation is achieved by installing one of the following solutions: 1. Closed frame. Formed by a D-shaped seal, placed in the inner perimeter of the frame, a d-shaped strip, placed on the upper part of the frame and leaf on hinges side and a acoustic bottom threshold for CS5 frame on the bottom part of the leaf including d-shaped strip and D-shaped seal. 2. Acoustic bottom threshold. Formed by a D-shaped seal, placed in the inner perimeter of the frame, a d-shaped strip, placed on the upper part of the frame and leaf on hinges side and a threshold on the lower part of the leaf including d-shaped strip and D-shaped seal.

Multipurpose door with acoustic 35-36 dB performance, available in single leaf, tested under EN ISO 10140-2 and classified according to EN ISO 717-1 standards. 63 mm thick door leaf, composed of two 0,8mm steel sheets assembled to CS5 corner frame. Equipped with 3 in-house design hinges with CE marking. Sound insulation is achieved by installing one of the following solutions: 1. Embedded threshold. Formed by a D-shaped seal, placed in the inner perimeter of the frame, a d-shaped strip, placed on the upper part of the frame and leaf on hinges side and a threshold embedded in the lower edge of the leaf. 2. Closed frame. Formed by a D-shaped seal, placed in the inner perimeter of the frame, a d-shaped strip, placed on the upper part of the frame and leaf on hinges side and a acoustic bottom threshold for CS5 frame on the bottom part of the leaf including d-shaped strip and D-shaped seal. 3. Acoustic bottom threshold. Formed by a D-shaped seal, placed in the inner perimeter of the frame, a d-shaped strip, placed on the upper part of the frame and leaf on hinges side and a threshold on the lower part of the leaf including d-shaped strip and D-shaped seal.

Fire Rated EI2 60 door with acoustic 35-36 dB performance, available in single leaf, tested under EN ISO 10140-2 and classified according to EN ISO 717-1 standards. 63 mm thick door leaf, composed of two 0,8mm steel sheets assembled to CS5 corner frame. Equipped with 3 in-house design hinges with CE marking. Sound insulation is achieved by installing one of the following solutions: 1. Embedded threshold. Formed by a D-shaped seal, placed in the inner perimeter of the frame, a d-shaped strip, placed on the upper part of the frame and leaf on hinges side and a threshold embedded in the lower edge of the leaf. 2. Closed frame. Formed by a D-shaped seal, placed in the inner perimeter of the frame, a d-shaped strip, placed on the upper part of the frame and leaf on hinges side and a acoustic bottom threshold for CS5 frame on the bottom part of the leaf including d-shaped strip and D-shaped seal. 3. Acoustic bottom threshold. Formed by a D-shaped seal, placed in the inner perimeter of the frame, a d-shaped strip, placed on the upper part of the frame and leaf on hinges side and a threshold on the lower part of the leaf including d-shaped strip and D-shaped seal.

Fire Rated EI2 60, 90 and 120’ door with acoustic 30-35 dB performance, available in doble leaf, tested under EN ISO 10140-2 and classified according to EN ISO 717-1 standards. 63 mm thick door leaf, composed of two 0,8mm steel sheets assembled to CS5 corner frame. Equipped with 3 in-house design hinges with CE marking. Acoustic insulation is achieved by using the smoke kit. Sound insulation is achieved by installing: • D-shaped seal, placed in the inner perimeter of the frame. • d-shaped strip, placed on the lower edge of the leaf and other seal on the upper part of the frame and on the hinges side of the leaf. • Flipper joint and d-shaped strip placed at the height of the lock between two leaves. • Flipper joint on the upper part of the frame. • Sill supplied loose for screwing or fixing to the floor.

Puerta de acero de una hoja, con o sin ventilación y en medida estándar. Ideal para adaptarse a cualquier tipo de apertura. Ideada para que sea fácil cambiar la mano de apertura. Hoja de 38mm de espesor, construida con dos...

La puerta Multiusos más versátil de la gama. Modelo de puerta que define el sistema de fabricación creado en 1972; ensamblando sin soldaduras la hoja, partiendo de 2 planchas de acero. Fabricable en versiones de 1 y 2 hojas, con...

Smooth and precise sliding door, with a high level of finish and the customization possibilities of the Office range. It is manufactured in 1 and 2 leaves with or without ventilation. 38mm thick leaf, assembled without welding, with 0.8mm thick steel plates, and an inner filling that gives it high mechanical, thermal and acoustic benefits. The installation at work can be done on a specially designed sub-frame or directly to work. The double leaf simultaneous opening system, of their own design, is worth mentioning among its wide range of accessories.

The Turia Fire dooris the model that puts the greatest manufacturing options at your disposal,both in terms of measurements and special accessories. It is available inversions of 1 and 2 leaves, with asymmetrical leaves if needed. For the EI2 30, 60 and 90 classifications, the leaf is63mm thick, and it is constructed with two 0.8mm thick sheets assembled withoutwelding. In the case of EI2 120 a third sheet is added, thatgives it a leaf thickness of 73mm. Assembled 3 own design hinges with CE marking (4 for EI2 120).Corner frame model CS5 ready to be installed on-site with mortar or by screwingit on an approved steel sub-frame.

53mm thick leaf, assembled with two 1,2 mm steel steel sheets. Equipped with 3 points security lock embedded with anti-drilling shield on the outside. Doorset completed with 1,5mm thick CR8 frame equipped with rubber seal to achieve a smooth and tight closing. The frame is prepared to be installed to the wall with metallic anchors. It has 2 steel adjustable in three directions hinges with nickel trims, in addition 2 anti-crow bar bolts complete the fittings. All these components make the door achieve C2 level in terms of burglar-protection.

En Andreu disponemos de un kit de control de humos Sa para toda nuestra gama TURIA en 1 y 2 hojas, que permite añadir a la prestación EI2tt-C5 las prestaciones Sa Nuestro Kit de Control de Humos Sa se compone...

The most versatile Multi-purpose door of the range widens its diversity of models by offering the possibility of being reversible. Leaf assembled without welding, starting from 2 steel plates. It is available in versions of 1 and standard and special measurements.

La puerta Ensamblada de una hoja alcanzó la clasificación: – Permeablidad al aire (UNE EN 1026:2000): A2 – Estanqueidad al agua (UNE EN 1027:2000): A0 – Carga del viento (UNE EN 12211:2000): CV3

Turia Premium is the door model with the highest mechanical resistance and smoothness of operation of the Turia range. It has the fire classification of EI2 60 and 120 C5. Three 1mm thick plates are used for the construction of the leaf, assembled together without the use of welding. The thickness of the same is 75mm. Both its 5 hinges with CE marking, and the lock and the door handle are made of stainless steel. Corner frame model CS5 ready to be installed on site with mortar (EI2 120) or by screwing it on an approved metallic sub-frame (EI2 60), supplied with the door.

The Concealed Hinge Combination (BO) and the Hidden Door Closers (CO) form the so-called CO-BO System. The concealed hinges, as they are not exposed, give greater security to the doors installed in locations with exit places to the outside, eliminating the possibility of its manipulation.

Los fijos d Puerta Corta-Fuegos revestida con Panel Laminado Estratificado de Alta Presión de 0.7mm, que le confiere un acabado personal y una gran resistencia al rayado, abrasión e impacto, poco mantenimiento y clasificación de hasta EI2 120. Dispone de una...

Las bisagras ocultas, al no quedar expuestas, confieren mayor seguridad a las puertas instaladas en ubicaciones de salida al exterior, eliminando la posibilidad de su manipulación.

The Concealed Hinge Combination (BO) and the Hidden Door Closers (CO) form the so-called CO-BO System. The concealed hinges, as they are not exposed, give greater security to the doors installed in locations with exit places to the outside, eliminating the possibility of its manipulation.

Double Leaf Fire door and Double Opening drection with EI2 60 classification. The new TDO is an improved version of our Turia DSA, allows the avacuation in both directions. It is used especially in corridors in which the evacuation route can be in both ways. The leaves has 63mm thickness constructed with two 0'8mm steel sheets assembled without welding points. It has 3 hinges per sheet, our own design and CE marking. It can be supplied with or without vision panels. Frame is a version of tubular CS5 which allow us to increase the clear opening. TDO frame now is 68mm instead of 100mm of DSA model. TDO model doesn´t require handles, lock or closing selector. This door must necessarily use door closers on both leaves. Bespoke production fo each project, there is not standard measures and we can even produce large dimensions, MEGA TDO

Hoja sin solape de 38mm de espesor, construida con dos planchas de acero galvanizado 0.6mm de espesor, ensambladas sin soldadura. Incorpora un burlete de polivinilo en el canto, que suaviza el cierre a la vez que hermetiza el conjunto. Con...

Fire Rated EI2 60, 90 and 120’ door with acoustic 35-39 dB performance, available in single leaf, tested under EN ISO 10140-2 and classified according to EN ISO 717-1 standards. 63 mm thick door leaf, composed of two 0,8mm steel sheets assembled to CS5 corner frame. Equipped with 3 in-house design hinges with CE marking. Acoustic insulation is achieved by using the smoke kit. Sound insulation is achieved by installing: • D-shaped seal, placed in the inner perimeter of the frame • d-shaped strip, placed on the lower edge of the leaf and other seal on the upper part of the frame and on the hinges side of the leaf. • Sill supplied loose for screwing or fixing to the floor.

Fire Rated EI2 60, 90 and 120’ door with acoustic 35-39 dB performance, available in single leaf, tested under EN ISO 10140-2 and classified according to EN ISO 717-1 standards. 63 mm thick door leaf, composed of two 0,8mm steel sheets assembled to CS5 corner frame. Equipped with 3 in-house design hinges with CE marking. Acoustic insulation is achieved by using the smoke kit. Sound insulation is achieved by installing: • D-shaped seal, placed in the inner perimeter of the frame • d-shaped strip, placed on the lower edge of the leaf and other seal on the upper part of the frame and on the hinges side of the leaf. • Sill supplied loose for screwing or fixing to the floor.

Multipurpose door with acoustic 26-29 dB performance, available in double leaf, tested under EN ISO 10140-2 and classified according to EN ISO 717-1 standards. 63 mm thick door leaf, composed of two 0,8mm steel sheets assembled to CS5 corner frame. Equipped with 3 in-house design hinges with CE marking. Sound insulation is achieved by installing: • D-shaped seal, placed in the inner perimeter of the frame. • d-shaped strip, placed on the lower edge of the leaf and on other seal on the upper parto f the frame and on the hinges side of the leaf. • Flipper joint and d-shaped strip placed at the height of the lock between two leaves. • Flipper joint on the upper part of the frame.

Fire Rated EI2 60 door with acoustic 35-36 dB performance, available in single leaf, tested under EN ISO 10140-2 and classified according to EN ISO 717-1 standards. 63 mm thick door leaf, composed of two 0,8mm steel sheets assembled to CS5 corner frame. Equipped with 3 in-house design hinges with CE marking. Sound insulation is achieved by installing one of the following solutions: 1. Embedded threshold. Formed by a D-shaped seal, placed in the inner perimeter of the frame, a d-shaped strip, placed on the upper part of the frame and leaf on hinges side and a threshold embedded in the lower edge of the leaf. 2. Closed frame. Formed by a D-shaped seal, placed in the inner perimeter of the frame, a d-shaped strip, placed on the upper part of the frame and leaf on hinges side and a acoustic bottom threshold for CS5 frame on the bottom part of the leaf including d-shaped strip and D-shaped seal. 3. Acoustic bottom threshold. Formed by a D-shaped seal, placed in the inner perimeter of the frame, a d-shaped strip, placed on the upper part of the frame and leaf on hinges side and a threshold on the lower part of the leaf including d-shaped strip and D-shaped seal.

Perfect choice when the space it allows, it gives the entrance a greater simmetry and more daylight inside the house.

Top panel is a great solution to give the door more stylish appearance without losing its security. It also allows the entrance of natural light.

53mm thick leaf, assembled with two 1mm steel plates. Security lock embedded with anti-drilling shield on the outside. Possible lock at 1, 3 or 5 points. It has 2 steel hinges with nickel finish adjustable in 3 directions, and 2 anti-crow bar bolts. 1mm thick CR8 frame incorporates rubber seal to ensure a smooth and airtight closing and a system to screw the door either to a specific sub-frame, or directly to work. All this gives the door high mechanical strength.

53mm thick leaf, assembled with two 1mm steel plates. Security lock embedded with anti-drilling shield on the outside. Possible lock at 1, 3 or 5 points. It has 2 steel hinges with nickel finish adjustable in 3 directions, and 2 anti-crow bar bolts. 1mm thick CR8 frame incorporates rubber seal to ensure a smooth and airtight closing and a system to screw the door either to a specific sub-frame, or directly to work. All this gives the door high mechanical strength.

53mm thick leaf, assembled with two 1mm steel plates. Security lock embedded with anti-drilling shield on the outside. Possible lock at 1, 3 or 5 points. It has 2 steel hinges with nickel finish adjustable in 3 directions, and 2 anti-crow bar bolts. 1mm thick CR8 frame incorporates rubber seal to ensure a smooth and airtight closing and a system to screw the door either to a specific sub-frame, or directly to work. All this gives the door high mechanical strength.

53mm thick leaf, assembled with two 1mm steel plates. Security lock embedded with anti-drilling shield on the outside. Possible lock at 1, 3 or 5 points. It has 2 steel hinges with nickel finish adjustable in 3 directions, and 2 anti-crow bar bolts. 1mm thick CR8 frame incorporates rubber seal to ensure a smooth and airtight closing and a system to screw the door either to a specific sub-frame, or directly to work. All this gives the door high mechanical strength.

53mm thick leaf, assembled with two 1mm steel plates. Security lock embedded with anti-drilling shield on the outside. Possible lock at 1, 3 or 5 points. It has 2 steel hinges with nickel finish adjustable in 3 directions, and 2 anti-crow bar bolts. 1mm thick CR8 frame incorporates rubber seal to ensure a smooth and airtight closing and a system to screw the door either to a specific sub-frame, or directly to work. All this gives the door high mechanical strength.

53mm thick leaf, assembled with two 1mm steel plates. Security lock embedded with anti-drilling shield on the outside. Possible lock at 1, 3 or 5 points. It has 2 steel hinges with nickel finish adjustable in 3 directions, and 2 anti-crow bar bolts. 1mm thick CR8 frame incorporates rubber seal to ensure a smooth and airtight closing and a system to screw the door either to a specific sub-frame, or directly to work. All this gives the door high mechanical strength.

53mm thick leaf, assembled with two 1mm steel plates. Security lock embedded with anti-drilling shield on the outside. Possible lock at 1, 3 or 5 points. It has 2 steel hinges with nickel finish adjustable in 3 directions, and 2 anti-crow bar bolts. 1mm thick CR8 frame incorporates rubber seal to ensure a smooth and airtight closing and a system to screw the door either to a specific sub-frame, or directly to work. All this gives the door high mechanical strength.

53mm thick leaf, assembled with two 1mm steel plates. Security lock embedded with anti-drilling shield on the outside. Possible lock at 1, 3 or 5 points. It has 2 steel hinges with nickel finish adjustable in 3 directions, and 2 anti-crow bar bolts. 1mm thick CR8 frame incorporates rubber seal to ensure a smooth and airtight closing and a system to screw the door either to a specific sub-frame, or directly to work. All this gives the door high mechanical strength.

53mm thick leaf, assembled without welding with two 1mm steel plates. Embedded security lock with the possibility of locking at 1, 3 or 5 points, with an anti-drilling safety shield on the outside, all in a black finish. It has 2 steel hinges with black trim finish, adjustable in 3 directions and CE marking, and 2 anti-crow bar bolts. 1.5mm thick CR8 frame incorporates rubber seal to ensure a smooth and airtight closing and a system to screw the door either to a specific sub-frame, or directly to work. All this gives the door high mechanical strength.

Fire door coated with a 0.7mm High Pressure Laminate panel that gives it a customised finish combined with great abrasion, scratch and impact resistance. It requires little maintenance and achieves fire classification up to EI2 120. It has a wide range of smooth finishes, wood imitation and abstract designs, as well as the possibility to customize the design of the panel, keeping the properties of laminates intact. The panels are stuck to the leaf made up of two 0.8mm thick sheets and assembled without welding. The set is completed with a stainless steel perimeter profile. The total thickness of the leaf is 72mm. Frame in stainless steel finish, model frame CS65. It is equipped with at least 3 own design stainless steel hinges bearing CE marking.

Fire door coated with a 0.7mm High Pressure Laminate panel that gives it a customised finish combined with great abrasion, scratch and impact resistance. It requires little maintenance and achieves fire classification up to EI2 120. It has a wide range of smooth finishes, wood imitation and abstract designs, as well as the possibility to customize the design of the panel, keeping the properties of laminates intact. The panels are stuck to the leaf made up of two 0.8mm thick sheets and assembled without welding. The set is completed with a stainless steel perimeter profile. The total thickness of the leaf is 72mm. Frame in stainless steel finish, model frame CS65. It is equipped with at least 3 own design stainless steel hinges bearing CE marking.

Fire door coated with a 0.7mm High Pressure Laminate panel that gives it a customised finish combined with great abrasion, scratch and impact resistance. It requires little maintenance and achieves fire classification up to EI2 120. It has a wide range of smooth finishes, wood imitation and abstract designs, as well as the possibility to customize the design of the panel, keeping the properties of laminates intact. The panels are stuck to the leaf made up of two 0.8mm thick sheets and assembled without welding. The set is completed with a stainless steel perimeter profile. The total thickness of the leaf is 72mm. Frame in stainless steel finish, model frame CS65. It is equipped with at least 3 own design stainless steel hinges bearing CE marking.

Fire door coated with a 0.7mm High Pressure Laminate panel that gives it a customised finish combined with great abrasion, scratch and impact resistance. It requires little maintenance and achieves fire classification up to EI2 120. It has a wide range of smooth finishes, wood imitation and abstract designs, as well as the possibility to customize the design of the panel, keeping the properties of laminates intact. The panels are stuck to the leaf made up of two 0.8mm thick sheets and assembled without welding. The set is completed with a stainless steel perimeter profile. The total thickness of the leaf is 72mm. Frame in stainless steel finish, model frame CS65. It is equipped with at least 3 own design stainless steel hinges bearing CE marking.

Fire door coated with a 0.7mm High Pressure Laminate panel that gives it a customised finish combined with great abrasion, scratch and impact resistance. It requires little maintenance and achieves fire classification up to EI2 120. It has a wide range of smooth finishes, wood imitation and abstract designs, as well as the possibility to customize the design of the panel, keeping the properties of laminates intact. The panels are stuck to the leaf made up of two 0.8mm thick sheets and assembled without welding. The set is completed with a stainless steel perimeter profile. The total thickness of the leaf is 72mm. Frame in stainless steel finish, model frame CS65. It is equipped with at least 3 own design stainless steel hinges bearing CE marking.

Fire door coated with a 0.7mm High Pressure Laminate panel that gives it a customised finish combined with great abrasion, scratch and impact resistance. It requires little maintenance and achieves fire classification up to EI2 120. It has a wide range of smooth finishes, wood imitation and abstract designs, as well as the possibility to customize the design of the panel, keeping the properties of laminates intact. The panels are stuck to the leaf made up of two 0.8mm thick sheets and assembled without welding. The set is completed with a stainless steel perimeter profile. The total thickness of the leaf is 72mm. Frame in stainless steel finish, model frame CS65. It is equipped with at least 3 own design stainless steel hinges bearing CE marking.

Fire door coated with a 0.7mm High Pressure Laminate panel that gives it a customised finish combined with great abrasion, scratch and impact resistance. It requires little maintenance and achieves fire classification up to EI2 120. It has a wide range of smooth finishes, wood imitation and abstract designs, as well as the possibility to customize the design of the panel, keeping the properties of laminates intact. The panels are stuck to the leaf made up of two 0.8mm thick sheets and assembled without welding. The set is completed with a stainless steel perimeter profile. The total thickness of the leaf is 72mm. Frame in stainless steel finish, model frame CS65. It is equipped with at least 3 own design stainless steel hinges bearing CE marking.

Fire door coated with a 0.7mm High Pressure Laminate panel that gives it a customised finish combined with great abrasion, scratch and impact resistance. It requires little maintenance and achieves fire classification up to EI2 120. It has a wide range of smooth finishes, wood imitation and abstract designs, as well as the possibility to customize the design of the panel, keeping the properties of laminates intact. The panels are stuck to the leaf made up of two 0.8mm thick sheets and assembled without welding. The set is completed with a stainless steel perimeter profile. The total thickness of the leaf is 72mm. Frame in stainless steel finish, model frame CS65. It is equipped with at least 3 own design stainless steel hinges bearing CE marking.

Fire door coated with a 0.7mm High Pressure Laminate panel that gives it a customised finish combined with great abrasion, scratch and impact resistance. It requires little maintenance and achieves fire classification up to EI2 120. It has a wide range of smooth finishes, wood imitation and abstract designs, as well as the possibility to customize the design of the panel, keeping the properties of laminates intact. The panels are stuck to the leaf made up of two 0.8mm thick sheets and assembled without welding. The set is completed with a stainless steel perimeter profile. The total thickness of the leaf is 72mm. Frame in stainless steel finish, model frame CS65. It is equipped with at least 3 own design stainless steel hinges bearing CE marking.

Puerta Corta-Fuegos de 1 hoja EI2 60, de 63 mm de espesor, fabricada con dos planchas de 0,8 mm de espesor ensambladas sin soldaduras. Disponibles en diferentes calidades: AISI 430 (estándar), AISI 304, AISI 316 u otros acabados bajo solcitud específica...

Puerta Corta-Fuegos de 1 hoja EI2 60, de 63 mm de espesor, fabricada con dos planchas de 0,8 mm de espesor ensambladas sin soldaduras. Disponibles en diferentes calidades: AISI 430 (estándar), AISI 304, AISI 316 u otros acabados bajo solcitud específica...

Puerta Corta-Fuegos de 1 hoja EI2 60, de 63 mm de espesor, fabricada con dos planchas de 0,8 mm de espesor ensambladas sin soldaduras. Disponibles en diferentes calidades: AISI 430 (estándar), AISI 304, AISI 316 u otros acabados bajo solcitud específica...

El modelo Mega Turia de 2 hojas es como el modelo Turia pero en grandes dimensiones. Debido a su tamaño, el espesor de chapa es de 1 mm y suficientes bisagras para soportar el mayor peso de esta puerta. Se...

El modelo Mega Turia de 1 hoja es como el modelo Turia pero en grandes dimensiones. Debido a su tamaño, el espesor de chapa es de 1 mm y suficientes bisagras para soportar el mayor peso de esta puerta. Se...

Turia Premium is the door model with the highest mechanical resistance and smoothness of operation of the Turia range. It has the fire classification of EI2 60 and 120 C5. Three 1mm thick plates are used for the construction of the leaf, assembled together without the use of welding. The thickness of the same is 75mm. Both its 5 hinges with CE marking, and the lock and the door handle are made of stainless steel. Corner frame model CS5 ready to be installed on site with mortar (EI2 120) or by screwing it on an approved metallic sub-frame (EI2 60), supplied with the door.

Turia Premium is the door model with the highest mechanical resistance and smoothness of operation of the Turia range. It has the fire classification of EI2 60 and 120 C5. Three 1mm thick plates are used for the construction of the leaf, assembled together without the use of welding. The thickness of the same is 75mm. Both its 5 hinges with CE marking, and the lock and the door handle are made of stainless steel. Corner frame model CS5 ready to be installed on site with mortar (EI2 120) or by screwing it on an approved metallic sub-frame (EI2 60), supplied with the door.

La Turia Premium es el modelo de puerta de mayor resistencia mecánica y suavidad de funcionamiento de la gama Turia. Dispone de clasificación al fuego de EI2 60 y 120 Para la construcción de la hoja se emplean 2 planchas de...

The Turia Fire dooris the model that puts the greatest manufacturing options at your disposal,both in terms of measurements and special accessories. It is available inversions of 1 and 2 leaves, with asymmetrical leaves if needed. For the EI2 30, 60 and 90 classifications, the leaf is63mm thick, and it is constructed with two 0.8mm thick sheets assembled withoutwelding. In the case of EI2 120 a third sheet is added, thatgives it a leaf thickness of 73mm. Assembled 3 own design hinges with CE marking (4 for EI2 120).Corner frame model CS5 ready to be installed on-site with mortar or by screwingit on an approved steel sub-frame.

The Turia Fire dooris the model that puts the greatest manufacturing options at your disposal,both in terms of measurements and special accessories. It is available inversions of 1 and 2 leaves, with asymmetrical leaves if needed. For the EI2 30, 60 and 90 classifications, the leaf is63mm thick, and it is constructed with two 0.8mm thick sheets assembled withoutwelding. In the case of EI2 120 a third sheet is added, thatgives it a leaf thickness of 73mm. Assembled 3 own design hinges with CE marking (4 for EI2 120).Corner frame model CS5 ready to be installed on-site with mortar or by screwingit on an approved steel sub-frame.

The Turia Fire dooris the model that puts the greatest manufacturing options at your disposal,both in terms of measurements and special accessories. It is available inversions of 1 and 2 leaves, with asymmetrical leaves if needed. For the EI2 30, 60 and 90 classifications, the leaf is63mm thick, and it is constructed with two 0.8mm thick sheets assembled withoutwelding. In the case of EI2 120 a third sheet is added, thatgives it a leaf thickness of 73mm. Assembled 3 own design hinges with CE marking (4 for EI2 120).Corner frame model CS5 ready to be installed on-site with mortar or by screwingit on an approved steel sub-frame.

The Turia Fire dooris the model that puts the greatest manufacturing options at your disposal,both in terms of measurements and special accessories. It is available inversions of 1 and 2 leaves, with asymmetrical leaves if needed. For the EI2 30, 60 and 90 classifications, the leaf is63mm thick, and it is constructed with two 0.8mm thick sheets assembled withoutwelding. In the case of EI2 120 a third sheet is added, thatgives it a leaf thickness of 73mm. Assembled 3 own design hinges with CE marking (4 for EI2 120).Corner frame model CS5 ready to be installed on-site with mortar or by screwingit on an approved steel sub-frame.

La puerta Corta-Fuegos Turia EI2 60 de 1 hoja, tiene un espesor de 63 mm, y se construye con dos planchas de 0,8 mm de espesor ensambladas sin soldaduras. Se fabrica con: – Mínimo 3 bisagras de diseño propio con marcado...

La puerta Corta-Fuegos Turia EI2 60 de 1 hoja, tiene un espesor de 63 mm, y se construye con dos planchas de 0,8 mm de espesor ensambladas sin soldaduras. Se fabrica con: – Mínimo 3 bisagras de diseño propio con marcado...

Fire door coated with a 0.7mm High Pressure Laminate panel that gives it a customised finish combined with great abrasion, scratch and impact resistance. It requires little maintenance and achieves fire classification up to EI2 120. It has a wide range of smooth finishes, wood imitation and abstract designs, as well as the possibility to customize the design of the panel, keeping the properties of laminates intact. The panels are stuck to the leaf made up of two 0.8mm thick sheets and assembled without welding. The set is completed with a stainless steel perimeter profile. The total thickness of the leaf is 72mm. Frame in stainless steel finish, model frame CS65. It is equipped with at least 3 own design stainless steel hinges bearing CE marking.

Fire door coated with a 0.7mm High Pressure Laminate panel that gives it a customised finish combined with great abrasion, scratch and impact resistance. It requires little maintenance and achieves fire classification up to EI2 120. It has a wide range of smooth finishes, wood imitation and abstract designs, as well as the possibility to customize the design of the panel, keeping the properties of laminates intact. The panels are stuck to the leaf made up of two 0.8mm thick sheets and assembled without welding. The set is completed with a stainless steel perimeter profile. The total thickness of the leaf is 72mm. Frame in stainless steel finish, model frame CS65. It is equipped with at least 3 own design stainless steel hinges bearing CE marking.

Fire door coated with a 0.7mm High Pressure Laminate panel that gives it a customised finish combined with great abrasion, scratch and impact resistance. It requires little maintenance and achieves fire classification up to EI2 120. It has a wide range of smooth finishes, wood imitation and abstract designs, as well as the possibility to customize the design of the panel, keeping the properties of laminates intact. The panels are stuck to the leaf made up of two 0.8mm thick sheets and assembled without welding. The set is completed with a stainless steel perimeter profile. The total thickness of the leaf is 72mm. Frame in stainless steel finish, model frame CS65. It is equipped with at least 3 own design stainless steel hinges bearing CE marking.

La puerta Turia Premium COBO EI2 60 de doble hoja es el modelo de puerta con mayor resistencia mecánica. Para la construcción de la hoja se emplean 2 planchas de 1mm de espesor ensambladas entre sí sin el empleo de...

La puerta corta-fuegos modelo TURIA con Bisagra Oculta EI2 120 es como una puerta TURIA estándar pero con: – 3 bisagras ocultas de diseño propio. La puerta TURIA con Bisagra Oculta tiene 3 características: a) Mayor seguridad, pues las bisagras...

Fire rated TURIA COBO EI260 door is similar to the standard TURIA door except to have 3 concealed hinges per each leaf, 1 concealed door closer ECO MULTIGENIUS per each leaf door.

Fire rated TURIA EI290 COBO door is similar to the standard fire door TURIA but additionnally it is equipped with: - 3 concealed hinges per each leaf, - ECO MULTIGENIUS hidden door closers. Hidden hinges, in contrast with standard ones, give greater security especially to the doors installed in locations with exit to the outside, eliminating the risk of door manipulation.

Los fijos de las puertas Corta-Fuegos Andreu cuentan con la misma estructura que la puerta y pueden instalarse tanto arriba como a ambos lados de la puerta.

Door with great potential for manufacturing thanks to the variety of finishes it offers and its wide range of stainless steel fittings. It has versions with 1 or 2 leaves, with or without ventilation and in standard or special measurements. It also offers a variety of installation configurations.

This is the most versatile Multi-purpose door of the whole range. This door model defines the manufacturing system created in 1972; assembling 2 steel sheets without welding. Available in single and double leaf, with or without louvers and with standard or customized dimensions. Suitable to any kind of openings and wall dimensions. 38mm thick sheet, composed by two 0.5mm thick galvanized steel sheets. Available in CS4 corner frame or C70 wrapping frame. The set is equipped with two or three 2.5mm thick steel hinges depending on the size of the door.

63mm thick leaf, assembled without welding, with two 0.7mm thick steel plates. Versions of 1 and 2 leaves, with or without ventilation and with the possibility of special measurements and accessories. It mounts 2 or 3 Fire door type hinges with CE marking and anti-crow bar bolts, on a 1.5mm thick CS5 frame. This one comes prepared with both talons with screw system to the door or to a specific sub-frame or directly to work. All this gives the door high mechanical strength.

The configuration of its structure makes it a safe door for the protection of those areas devoted to radiology. Which must be perfectly isolated and conditioned. With a door leaf thickness of 63mm manufactured without welding two steel sheets of 0.8mm, Turia RX is the melting between our fire rated model Turia (the most versatile and adaptable ) and the lead core . All in accordance with the UNE-EN 12588: 2008, making this door an insurmountable barrier to the action of X-rays. Regarding the frame, it's the CS5 corner model, prepared to be screwed or fitted with mortar, with or without sub-frame. It has a minimum of 3 hinges CE marked and intumescent seal.

63mm thick leaf, assembled without welding, with two 0.7mm thick steel plates. Versions of 1 and 2 leaves, with or without ventilation and with the possibility of special measurements and accessories. It mounts 2 or 3 Fire door type hinges with CE marking and anti-crow bar bolts, on a 1.5mm thick CS5 frame. This one comes prepared with both talons with screw system to the door or to a specific sub-frame or directly to work. All this gives the door high mechanical strength.

Steel door with steel frame and leaf, paneled with HPL (High Pressure Laminate) with a choice of more than 200 references (both solid colours and wood). E-QUO becomes a customizable doorset valid not only for hospitals and retail shops but also for any office building. Leaf thickness of 40 mm, built with two galvanized steel sheets of 0.5mm thickness, paneled with HPL of 0.7mm thickness and steel profile in the edge of the panel. All this gives great resistance to scratches, abrasion and impact to the whole doorset. 1 point mortice locking system. Stainless steel ironmongery on rosaces. Large choice of frames: CS4 corner frame, or C70 and CO7V wrapping frame. Available finishings are powder coating or stainless steel (except C70). It has perimeter seal that provides smoothness of operation. All versions are prepared both to install directly to work as well as for screw mounting system.

Door with great potential for manufacturing thanks to the variety of finishes it offers and its wide range of stainless steel fittings. It has versions with 1 or 2 leaves, with or without ventilation and in standard or special measurements. It also offers a variety of installation configurations. 50mm thick leaf, constructed by joining without welding. It has two 0.8mm thick galvanized steel sheets. It mounts three 2.5mm own design stainless steel hinges, on different frame models: CS4 corner frame and the CO7, CO9 or CR8 non-corner frames. In every case with rubber seal providing excellent closing smoothness.

63mm thick leaf, assembled without welding, with two 0.7mm thick steel plates. Versions of 1 and 2 leaves, with or without ventilation and with the possibility of special measurements and accessories. It mounts 2 or 3 Fire door type hinges with CE marking and anti-crow bar bolts, on a 1.5mm thick CS5 frame. This one comes prepared with both talons with screw system to the door or to a specific sub-frame or directly to work. All this gives the door high mechanical strength.

Door with great potential for manufacturing thanks to the variety of finishes it offers and its wide range of stainless steel fittings. It has versions with 1 or 2 leaves, with or without ventilation and in standard or special measurements. It also offers a variety of installation configurations. 50mm thick leaf, constructed by joining without welding. It has two 0.8mm thick galvanized steel sheets. It mounts three 2.5mm own design stainless steel hinges, on different frame models: CS4 corner frame and the CO7, CO9 or CR8 non-corner frames. In every case with rubber seal providing excellent closing smoothness.

38mm thick sheet, constructed with two 0.5mm thick galvanized steel sheets. It is available in CS4 corner frame or C70 wrapping frame. The set has two or three 2.5mm thick steel hinges, depending on the size of the door.

63mm thick leaf, assembled without welding, with two 0.7mm thick steel plates. Versions of 1 and 2 leaves, with or without ventilation and with the possibility of special measurements and accessories. It mounts 2 or 3 Fire door type hinges with CE marking and anti-crow bar bolts, on a 1.5mm thick CS5 frame. This one comes prepared with both talons with screw system to the door or to a specific sub-frame or directly to work. All this gives the door high mechanical strength.

63mm thick leaf, assembled without welding, with two 1mm thick steel plates.

38mm thick sheet, constructed with two 0.5mm thick galvanized steel sheets. It is available in CS4 corner frame or C70 wrapping frame. The set has two or three 2.5mm thick steel hinges, depending on the size of the door.

A 38mm thick leaf, assembled without welding, simple and functional. It is characterized by a light drawing of rectangular lines, on one or both sides, as well as by the handle set with stainless steel rosette. All of this gives it a stylish design, tailored to the market demands.

Hoja de 63mm de espesor, ensamblada sin soldaduras con dos planchas de acero de 0.8mm de espesor. Versiones de dos hojas, con o sin ventilación y con posibilidad de accesorios y medidas especiales. Monta 2 o 3 bisagras tipo Corta-Fuegos...

Door with great potential for manufacturing thanks to the variety of finishes it offers and its wide range of stainless steel fittings. It has versions with 1 or 2 leaves, with or without ventilation and in standard or special measurements. It also offers a variety of installation configurations.

This is the most versatile Multi-purpose door of the whole range. This door model defines the manufacturing system created in 1972; assembling 2 steel sheets without welding. Available in single and double leaf, with or without louvers and with standard or customized dimensions. Suitable to any kind of openings and wall dimensions. 38mm thick sheet, composed by two 0.5mm thick galvanized steel sheets. Available in CS4 corner frame or C70 wrapping frame. The set is equipped with two or three 2.5mm thick steel hinges depending on the size of the door.

This is the most versatile Multi-purpose door of the range. This door model defines the manufacturing system created in 1972; assembling the leaf without welding, starting from 2 steel plates.

This is the most versatile Multi-purpose door of the range. This door model defines the manufacturing system created in 1972; assembling the leaf without welding, starting from 2 steel plates.

63mm thick leaf, assembled without welding, with two 0.7mm thick steel plates. Versions of 1 and 2 leaves, with or without ventilation and with the possibility of special measurements and accessories. It mounts 2 or 3 Fire door type hinges with CE marking and anti-crow bar bolts, on a 1.5mm thick CS5 frame. This one comes prepared with both talons with screw system to the door or to a specific sub-frame or directly to work. All this gives the door high mechanical strength.