The counter frame CS5 is manufactured with 1mm thick galvanised steel sheet. This accessory might be furnished in galvanised or epoxy coating finish as the door frame.
It is sent as a loose piece and consists of one horizontal and two vertical pieces providing an easy installation. Its packaging does not require any additional screw as the lateral profiles are previously fixed to the head piece in the factory.
Over the structural profile 70x40 the frame is screwed together with the counter-frame to the profile.
It needs to know the thickness of the wall to produce the counter-frame with the size of the wall.
The rebate is screwed to the CS5 frame as a wing.
Over the structural profile 70x40 the frame is screwed together with the counter-frame to the profile.
It needs to know the thickness of the wall to produce the counter-frame with the size of the wall.
The Supplement for the CS5 wide frame is a L-shaped folded piece. It is equipped with screw system in order to fit it to the CS5 frame.
The Supplement is usually mounted to the frame when it comes out of the factory. This set is to be installed on the wall with the help of steel anchors.
1,5mm thick L-shaped folded steel piece. It allows to wrap the wall in order to cover all its width. It is manufactured according to wall thickness.
1,00 to 1,5mm thick L-shaped folded steel piece. It allows to wrap the wall in order to cover all its width. It is manufactured according to wall thickness.
Soy un estupido de mierda y atiendo boludos
English (UK) 
Español 
Valenciano 
Français 
